CDA 710 X 1D STRAIGHT THROUGH SILENCER

710mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

CDA 630 X 1D STRAIGHT THROUGH SILENCER

630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

CDA 500 X 1D STRAIGHT THROUGH SILENCER

500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

CDA 450 X 1D STRAIGHT THROUGH SILENCER

450mm dia x 450mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

CDA 400 X 1D STRAIGHT THROUGH SILENCER

400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

630MM FLEXIBLE CONNECTION

630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

 

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

 

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

710MM FLEXIBLE CONNECTION

710mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

 

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

 

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

710MM LOUVRE SHUTTER

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

 

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

 

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

 

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

CDA 355 X 1D STRAIGHT THROUGH SILENCER

355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

I'm a Title

315mm dia x 315mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

ME SERIES ELECTRONIC FAN SPEED CONTROLLERS

Your chance to have your own branded market leading Flakt Woods ME series electronic fan speed controllers. Just imagine your customer has a problem, and whats there right in front of them, your brand, with your contact details, you can't put a price on this incredible after sales oppurtunity.

 

The whole range is available for you to buy, for less than you think, and remember these controllers can be used with any manufacturer of fans

 

You have the freedom to decide on the whole design including colour and fonts, add as much or as little as you feel appropriate

 

This is a unque oppurtuntity and for a limited time is on special offer, but hurry it won't last for ever

 

Models available are:

 

ME1.1

ME1.3

ME1.6

ME1.12

Note: A minimum of 25 off any of sizes can be ordered, so if all you want is 25 off ME1.6's your in luck. Unfortunately we can't accept an order of mixed sized controllers.

Please reload

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable to run in temperatures from -40°C to up to 70°C in some instances
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 630mm from stock
  • 710mm – 1000mm check for availability
  • Tough epoxy paint finish
  • Die cast aluminium impellers (the bit that goes around)
  • Motor class F insulation with protection to IP54
  • All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

 

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

 

.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

Please reload

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 250mm – 630mm 1ph from stock

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

 

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 250mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 250mm – 630mm 1ph from stock

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

 

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 250mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 250mm – 630mm 1ph from stock

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 250mm – 630mm 1ph from stock

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

 

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular short cased axial on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 315mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular short cased axial on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm 1ph from stock

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

 

All fans reversible for supply or extract . If reversed some performance will be lost.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular short cased axial on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from -40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 315mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54

All fans reversible for supply or extract . If reversed some performance will be lost.

The Roof Units SP range of electronic fan speed controllers manufactured by Vent Axia. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

  • SP5001 suitable for a maximum full load of 1.7 amp
  • SP5025 suitable for a maximum full load of 3 amps
  • SP5050 suitable for a maximum full load of 6 amps (up to 7 amps when used as 3 wire (+earth))
  • SP5010 suitable for a maximum full load of 10amps

The SP range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

  • Flakt Woods
  • Ziehl Abegg
  • Elta
  • Helios
  • Solar and Palau
  • Nuaire

Not sure if your fan is suitable? just ask and we can check for you

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable to run in temperatures from -40°C to up to 70°C in some instances
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 630mm from stock
  • 710mm – 1000mm check for availability
  • Tough epoxy paint finish
  • Die cast aluminium impellers (the bit that goes around)
  • Motor class F insulation with protection to IP54
  • All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable to run in temperatures from -40°C to up to 70°C in some instances
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 630mm from stock
  • 710mm – 1000mm check for availability
  • Tough epoxy paint finish
  • Die cast aluminium impellers (the bit that goes around)
  • Motor class F insulation with protection to IP54
  • All fans reversible for supply or extract
  •  
Please reload

EXTRACTOR FANS DETAILS