top of page
EXTRACTOR FAN DETAILS

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

GBD630/6 HELIOS 3PH GIGABOX CENTRIGUGAL FAN

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

.

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

.

canopy extractor switch repair

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

canopy extractor switch repair

Specification:
 

RR 125C model:

Max Air Volume : 133 l/s
Noise : 50 dB(A)
Watts :  High 62W / Low 47W
R.P.M : High 2480 / Low 1240


Helios In-line Centrifugal Fan Overview:
These very popular centrifugal in line fans are ideal for connection to circular ducts and offer a high pressure with a good volume flow rate. Fully speed controllable with a steel casing to IP44 and an IP 55 terminal box. RR 125C is two speed as standard using the DS 2/2 controller (accessory).

Application:
With 125 mm spigot connections these in line fans are suitable for all general ventilation. Can be mounted in any position and ideal for ducted systems in offices, shops and workshops etc.

Main Features:
- High pressure characteristic to overcome resistances of bends, filters etc.
- 100% speed controllable with accessory.
- RR 125 C has additional two speed operation with DS 2/2 accessory.
- High performance up to 133 l/s.
- Installation in any position: horizontally, vertically or pitched.
- Suitable for intake or extract.
- 1 Year no quibble warranty.

Helios RR 125 Dimensions:
Duct Diameter:125 mm
Length : 198 mm
Weight :  2.9 KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Helios Code:
RR 125C

canopy extractor switch repair

Helios HRFW Single Phase Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E EX de II B axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors

 

Application:

250 mm fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features: 

- Suitable for Hazardous areas.

- Explosion proof E Ex de II B

- Quiet and powerful axial flow fan for use with 315 mm dia ducting

- High performance up to 531 l/s and 267 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001-

 

Helios HRFW 250 ... Ex Dimensions:

Duct Diameter : 250 mm

Length :300 mm

Weight : 7.5 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

canopy extractor switch repair

Helios HRFW Single Phase Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II  axial fan range suitable for indoor or shower proof applications rated IP54 with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors

 

Application:

250 mm fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features: 

- Suitable for Hazardous areas.

- Explosion proof E Exe II

- Quiet and powerful axial flow fan for use with 250 mm dia ducting

- High performance up to 531 l/s and 267 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001-

 

Helios HRFd 250 ... Ex Dimensions:

Duct Diameter : 250 mm

Length :300 mm

Weight : 7.5 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

HRFD 250/2 Ex, HRFD 250/4 Ex

 

canopy extractor switch repair


Helios HRFW Single Phase Fan Overview:
Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E EX de II B axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors


Application:
315 mm fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

Main Features: 
- Suitable for Hazardous areas.
- Explosion proof E Ex de II B
- Quiet and powerful axial flow fan for use with 315 mm dia ducting
- High performance up to 531 l/s and 267 l/s.
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001-

Helios HRFW 315 ... Ex Dimensions:
Duct Diameter : 315 mm
Length :300 mm
Weight : 8.0 KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Axial fan - 3 ph - HRFD 315/2 Ex & 315/4 Ex

 

Helios HRFD Three Phase Fan Overview:
Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors.

Application:
315 mm Explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

Main Features: 
- Suitable for Hazardous areas.
- Explosion proof E Exe II
- Quiet and powerful axial flow fan for use with 315 mm dia ducting
- High performance up to 1114 l/s and 589 l/s.
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001-

Helios HRFD 315 Ex Dimensions:              
Duct Diameter : 315 mm
Length : 300 mm
Weight : 8.0KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Helios Code:
HRFD 315/2 Ex, HRFD 315/4 Ex

canopy extractor switch repair

Helios Horizontal Centrifugal Roof Unit Overview:

Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminum cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardous atmosphere may exist

 

Application:

225 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where  hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

 

Main Features: 

- Atex certified explosion proof unit

- Suitable for Hazardous areas

- Robust metal roof units

- Suitable for flat and sloping roofs up to 20 degrees.

- Threaded studs for connecting ducting.

- Quiet and powerful centrifugal fans for high pressures

- High performance up to 0.469 m/s .

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

canopy extractor switch repair

Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
315 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 0.914 m/s and 1.261 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

canopy extractor switch repair


Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
400 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 1.236 m/s and 1.698 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

Please reload

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable to run in temperatures from -40°C to up to 70°C in some instances
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 630mm from stock
  • 710mm – 1000mm check for availability
  • Tough epoxy paint finish
  • Die cast aluminium impellers (the bit that goes around)
  • Motor class F insulation with protection to IP54
  • All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

 

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

 

.

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably the most popular short cased axial on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.

 

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment

Suitable to run in temperatures from -40°C to up to 70°C in some instances

Low to medium air volumes

Low to medium static pressures

Available sizes 315mm – 630mm from stock

710mm – 1000mm check for availability

Tough epoxy paint finish

Die cast aluminium impellers (the bit that goes around)

Motor class F insulation with protection to IP54

All fans reversible for supply or extract

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

Please reload

GBW500/6 HELIOS 1PH GIGABOX CENTRIGUGAL FAN

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

GBW560/4 HELIOS 1PH GIGABOX CENTRIGUGAL FAN

.A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

GF674501 ESTOC TARGE POWERBOX 67-450-1

Another great square duct fan from FlaktWoods, constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees for straight through air movement.

 

It operates at a higher temperature range than the Estoc Range as the motor is out of the airstream

 

Volumes Up to 5.5 m3/s (20,000 m3/h)

Pressures Up to 1400 pa (Static)

Impeller Backward Curved Impeller

Case Style Aluminium Penta-post Frame

Case Coating Pregalvanised Sheet Steel

Case Insulation Double Skinned 20mm Fiberglass

Installation Horizontal or Vertical

Location Internal or External with Cowl

IP rating IP54

Temperature Up to 75-110°C depending on size

Axial fan - 3 ph - HRFD 500/4 Ex

Helios HRFD Three Phase Fan Overview:
Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors


Application:
500mm explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

Main Features: 
- Suitable for Hazardous areas.
- Explosion proof E Exe II
- Quiet and powerful axial flow fan for use with 500 mm dia ducting
- High performance up to 2614 l/s.
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

Helios HRFD 500/4  Ex Dimensions:
Duct Diameter : 500 mm
Length : 330 mm
Weight : 17.2 KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Helios Code:
HRFD 500/4 Ex

3Ph. Roof Unit - RDD 630/6 Ex

Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
630 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 4.806 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

630MM FLEXIBLE CONNECTION

630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

 

630MM LOUVRE SHUTTER

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

 

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

 

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

 

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

CDA 400 X 1D STRAIGHT THROUGH SILENCER

400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

Please reload

commercial canopy service

710mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting

 

Can also be used to fix directly to a Silencer

 

Can also be used to fix directly to ducting

 

Hot dipped Galvanised after manufacture

commercial canopy service

suits any manufacturer of fans

710mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting.

 

This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans

 

Can also be used to fix directly to a Silencer

 

Can also be used to fix directly to ducting

 

Manufactured from pre Galvanised sheet

commercial canopy service

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

 

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

 

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

 

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

commercial canopy service

Supplied in pairs

710mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package

The Mounting Foot can be used to mount the fan in the horizontal or vertical position

Usually used in conjunction with Anti Vibration Mounts

Can also be used to fit directly to Silencers with or without Anti Vibration Mounts

commercial canopy service

Your chance to have your own branded market leading Flakt Woods ME series electronic fan speed controllers. Just imagine your customer has a problem, and whats there right in front of them, your brand, with your contact details, you can't put a price on this incredible after sales oppurtunity.

 

The whole range is available for you to buy, for less than you think, and remember these controllers can be used with any manufacturer of fans

 

You have the freedom to decide on the whole design including colour and fonts, add as much or as little as you feel appropriate

 

This is a unque oppurtuntity and for a limited time is on special offer, but hurry it won't last for ever

 

Models available are:

 

ME1.1

ME1.3

ME1.6

ME1.12

Note: A minimum of 25 off any of sizes can be ordered, so if all you want is 25 off ME1.6's your in luck. Unfortunately we can't accept an order of mixed sized controllers.

commercial canopy service

560mm dia x 560mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

commercial canopy service

630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

 

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

commercial canopy service

RichText.

commercial canopy service

Helios HRFD Three Phase Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors.

 

Application:

355 mm explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features: 

- Suitable for Hazardous areas.

- Explosion proof E Exe II

- Quiet and powerful axial flow fan for use with 355 mm dia ducting

- High performance up to 1556l/s and 884 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

 

 

Helios HRFD 355/2 Ex Dimensions: Helios HRFD 355/4 Ex Dimensions:

Duct Diameter : 355: mm

Length : 300 mm

Weight : 14.0 KG Duct Diameter : 355 mm

Length : 300 mm

Weight : 9.5 KG

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

HRFD 355/2 Ex, HRFD 355/4 Ex

commercial canopy service

 

Helios HRFD Three Phase Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors

 

Application:

315 mm explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features: 

- Suitable for Hazardous areas.

- Explosion proof E Exe II

- Quiet and powerful axial flow fan for use with 400 mm dia ducting

- High performance up to 1114 l/s and 589 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

 

Helios HRFD 400 Ex Dimensions:

Duct Diameter : 400 mm

Length : 330 mm

Weight : 13.0 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

HRFD 400/4 Ex

commercial canopy service

Helios HRFD Three Phase Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors

 

Application: 

450 mm explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features: 

- Suitable for Hazardous areas.

- Explosion proof E Exe II

- Quiet and powerful axial flow fan for use with 450 mm dia ducting

- High performance up to 1611 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

 

Helios HRFD 450 Ex Dimensions:

Duct Diameter :450 mm

Length : 330 mm

Weight : 15.5 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

HRFD 450/4 Ex

commercial canopy service

Helios In-line Explosion Proof Centrifugal Fan Overview:
Explosion proof fans suitable for hazardous areas offering high volumes through wall or partitions. Explosion proof Ex e II 2G centrifugal in line fan range suitable for indoor use rated IP54 (splashproof) with a plastic casing

Application:
180 mm ATEX certified explosion proof fans are suitable for most small and medium systems removing/changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, solvent stores etc. Can be used 100mm and 125 mm ducting using RZ 180/100 or RZ 180/125 (accessory). Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

Main Features:
- ATEX certified
- Suitable for Hazardous areas.
- Explosion proof Ex e II 2G
- Quiet and powerful centrifugal in line fan for duct mounting
- High performance up to 86 l/s.
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001 1 Year no quibble warranty.

Helios RRK Ex 180 Dimensions:
Duct Diameter:180 mm
Length : 164 mm
Weight : 3.0  KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Helios Code:
RRK 180 Ex

commercial canopy service

Helios In-line Explosion Proof Centrifugal Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes through wall or partitions. Explosion proof Ex e II 2G centrifugal in line fan range suitable for indoor use rated IP54 (splashproof) with a plastic casing

 

Application:

200 mm ATEX certified explosion proof fans are suitable for most small and medium systems removing/changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features:

- ATEX certified

- Suitable for Hazardous areas.

- Explosion proof Ex e II 2G

- Quiet and powerful centrifugal in line fan for duct mounting

- High performance up to156 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

 

Helios RRK Ex 200 Dimensions:

Duct Diameter:200 mm

Length : 267 mm

Weight :  5.5 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

RRK 200 Ex

commercial canopy service

Helios In-line Explosion Proof Centrifugal Fan Overview:

Explosion proof fans suitable for hazardous areas offering high volumes through wall or partitions. Explosion proof Ex e II 2G centrifugal in line fan range suitable for indoor use rated IP54 (splashproof) with a plastic casing

 

Application:

250 mm ATEX certified explosion proof fans are suitable for most small and medium systems removing/changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

 

Main Features:

- ATEX certified

- Suitable for Hazardous areas.

- Explosion proof Ex e II 2G

- Quiet and powerful centrifugal in line fan for duct mounting

- High performance up to269 l/s.

- 1 Year no quibble warranty

- Quality assured by the manufacturer ISO9001

 

Helios RRK Ex 250 Dimensions:

Duct Diameter: 250 mm

Length : 205 mm

Weight :  7.0 KG

 

Resources:

Installation Instructions - click here

Wiring Diagram - click here

Catalogue Pages - click here

 

Helios Code:

RRK 250 Ex

commercial canopy service

Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
560 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 3.139 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

commercial canopy service

Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
450 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 1.694 m/s and 2.578 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

Please reload

GBW500/6 HELIOS 1PH GIGABOX CENTRIGUGAL FAN

A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

Self-supporting frame construction from aluminium hollow profiles
Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool
Steel backward curved centrifugal impellor
90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path
T120 range only has motor out of air stream
Suitable for outdoors with appropriate weather cowl
All sizes except GBD630/4 T120 can be speed controlled

GBW560/4 HELIOS 1PH GIGABOX CENTRIGUGAL FAN

.A great multifunctional box fan from German manufacturer Helios Ventilation. This fan is suitable for medium to higher airflow volumes against high resistances in every type of ventilation system The ..T120 Range is also suitable for the extraction of dirty, humid and hot air upto a maximum of 120Deg C.

 

Self-supporting frame construction from aluminium hollow profiles

Double walled side panels with 20mm thick temperature insulating and flame retardent mineral wool

Steel backward curved centrifugal impellor

90 Degree or straight through air path possible. Except T120 range which is only 90 degree air path

T120 range only has motor out of air stream

Suitable for outdoors with appropriate weather cowl

All sizes except GBD630/4 T120 can be speed controlled

GF674501 ESTOC TARGE POWERBOX 67-450-1

Another great square duct fan from FlaktWoods, constructed using a Pentapost frame which supports pre-galvanised steel sandwich panels, each filled with 20mm thick mineral wool for acoustic insulation. Each unit comes with 4 panels, all of which can be removed and relocated to give multiple outlet orientations at either 90 degrees to the inlet or 180 degrees for straight through air movement.

 

It operates at a higher temperature range than the Estoc Range as the motor is out of the airstream

 

Volumes Up to 5.5 m3/s (20,000 m3/h)

Pressures Up to 1400 pa (Static)

Impeller Backward Curved Impeller

Case Style Aluminium Penta-post Frame

Case Coating Pregalvanised Sheet Steel

Case Insulation Double Skinned 20mm Fiberglass

Installation Horizontal or Vertical

Location Internal or External with Cowl

IP rating IP54

Temperature Up to 75-110°C depending on size

Axial fan - 3 ph - HRFD 500/4 Ex

Helios HRFD Three Phase Fan Overview:
Explosion proof fans suitable for hazardous areas offering high volumes at low to medium pressures. Explosion proof E Exe II axial fan range suitable for indoor or outdoor use rated IP55 (weatherproof) with a galvanised steel casing for connecting to circular ducting using matching flanges and flexible connectors


Application:
500mm explosion proof fans are suitable for most small and medium systems removing changing the air and removing airborne pollutants from all Hazardous areas including fume cupboards, workshops, spray booths, solvent stores etc. Check with your local Health and Safety Executive (HSE) for advice about suitability of these fans to your application.

Main Features: 
- Suitable for Hazardous areas.
- Explosion proof E Exe II
- Quiet and powerful axial flow fan for use with 500 mm dia ducting
- High performance up to 2614 l/s.
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

Helios HRFD 500/4  Ex Dimensions:
Duct Diameter : 500 mm
Length : 330 mm
Weight : 17.2 KG

Resources:
Installation Instructions - click here
Wiring Diagram - click here
Catalogue Pages - click here

Helios Code:
HRFD 500/4 Ex

3Ph. Roof Unit - RDD 630/6 Ex

Helios Horizontal Centrifugal Roof Unit Overview:
Explosion proof centrifugal roof units offering high volumes and high pressures through the roof. designed for outdoor use rated IP55 (weatherproof) with a galvanised steel base and an aluminium cowl . With an terminal box fitted to the beneath the rain cowl. Suitable for areas where hazardsou atmopher may exist.

Application:
630 mm inlet diameter centrifugal roof fans ATEX certified explosion proof,are suitable for most small systems, either ducted or open inlet, removing/changing the air where hazardous substances may be in the air and from all areas including offices, hospitals, retail outlet, workshops, warehouses etc.

Main Features: 
- Atex certified explosion proof unit
- Suitable for Hazardous areas
- Robust metal roof units
- Suitable for flat and sloping roofs up to 20 degrees.
- Threaded studs for connecting ducting.
- Quiet and powerful centrifugal fans for high pressures
- High performance up to 4.806 m/s .
- 1 Year no quibble warranty
- Quality assured by the manufacturer ISO9001

630MM FLEXIBLE CONNECTION

630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

 

630MM LOUVRE SHUTTER

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

 

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

 

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

 

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

CDA 400 X 1D STRAIGHT THROUGH SILENCER

400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

 

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

 

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

 

1. System side (usually the noise level inside a building) noise level is reduced

 

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

 

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

Please reload

bottom of page