We Repair & Install Commercial Extractor Fans across London, Sussex and Surrey including South London, West London,East London, North London,Romford,Grays,Brentwood,Billericay,Wickford,Southend-on-Sea,Basildon,Chelmsford,Clacton-on-sea,Colchester,Ipswich,Felixstowe, Herwich,Braintree,Sudbury,Bury st Edmunds,Thetford, Norwich,Great Yarmouth,Lowestoft,King's Lynn,Boston,Spalding,Skegness,Peterborough,Cambridge,Grantham,Sheffield,Chesterfield,Nottingham,Loughborough,Leicester,corby,Kettering,Derby,Manchester,Liverpool,Chester,,Stoke-on-trent,Shrewsbury,Telford,Wolverhamtono,Birmingham,Coventry,Warwick,Northamton,Milton Keynes, Luton,Oxford,cheltenham,Gloucestero,Hertford,Newport,Cardiff,Swansea,Bristol,Exeter,Swindon,Reading,Basingstoke,winchester,Southampton,Portsmouth,Guildford,Brighton,Eastbourne,Hastings,Folkestone,Dover,Maidston,Canterbury,Margate . Also We do Emergency Extractor Fans Replacement Nationwide . Same Day Extractor fan Replacement by 15 Years Experienced Engineer. .We also have Commercial Extractor Fans in stock 24/7.
 
 

Manufactured by S&P (Soler and Palau) founded in Spain in 1951 by the engineers Eduard Soler and Josep Palau, this range of painted short cased 2 stage axials are possibly the best performing on the market. This range of Soler and Palau products were formally distributed through Vent Axia known as “turbo props”. This range of fans offers the best combination of performance and price available.

Contra rotating: High Pressure

Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume.

Impeller dynamically balanced

Impeller dynamically balanced according to ISO 1940 standard, giving vibration free operation.

Corrosion resistance

Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws.

Terminal Box

Wiring terminal box with cable gland PG-11

All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors

All the motors are IP65, Class F insulation (1) equipped with thermal protection.

Single phase motors are variable voltage.

Three phase motors suitable for inverter control.

Electrical supplies

Single phase 230V-50Hz (Capacitor located inside the wiring terminal box)

Three phase 230/400V-50Hz

Working temperatures from -40°C up to 70°C

Manufactured by S&P (Soler and Palau) founded in Spain in 1951 by the engineers Eduard Soler and Josep Palau, this range of painted short cased 2 stage axials are possibly the best performing on the market. This range of Soler and Palau products were formally distributed through Vent Axia known as “turbo props”. This range of fans offers the best combination of performance and price available.

Contra rotating: High Pressure

Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume.

Impeller dynamically balanced

Impeller dynamically balanced according to ISO 1940 standard, giving vibration free operation.

Corrosion resistance

Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws.

Terminal Box

Wiring terminal box with cable gland PG-11

All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors

All the motors are IP65, Class F insulation (1) equipped with thermal protection.

Single phase motors are variable voltage.

Three phase motors suitable for inverter control.

Electrical supplies

Single phase 230V-50Hz (Capacitor located inside the wiring terminal box)

Three phase 230/400V-50Hz

Working temperatures from -40°C up to 70°C

Manufactured by S&P (Soler and Palau) founded in Spain in 1951 by the engineers Eduard Soler and Josep Palau, this range of painted short cased 2 stage axials are possibly the best performing on the market. This range of Soler and Palau products were formally distributed through Vent Axia known as “turbo props”. This range of fans offers the best combination of performance and price available.

Contra rotating: High Pressure

Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume.

Impeller dynamically balanced

Impeller dynamically balanced according

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

The TD SILENT series are Mixed-Flow fans with sound absorbent insulation. Making it extremely quiet.

Manufactured in plastic material, with a specifically designed internal skin to direct the sound waves at the right angle for them to be captured by the sound-absorbent material.

This model offers a solution to ventilation problems, especially in places where people work and low sound level is required.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  Please see photos.

Connection box can be rotated 360 degrees to facilitate easy connection to power cable.

2 Pole - Single Phase 220 - 240v / 50Hz 

(Motors IP44)

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

Manufactured by S&P (Soler and Palau) founded in Spain in 1951 by the engineers Eduard Soler and Josep Palau, this range of painted short cased 2 stage axials are possibly the best performing on the market. This range of Soler and Palau products were formally distributed through Vent Axia known as “turbo props”. This range of fans offers the best combination of performance and price available.

Contra rotating: High Pressure

Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume.

Impeller dynamically balanced

Impeller dynamically balanced according to ISO 1940 standard, giving vibration free operation.

Corrosion resistance

Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws.

Terminal Box

Wiring terminal box with cable gland PG-11

All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors

All the motors are IP65, Class F insulation (1) equipped with thermal protection.

Single phase motors are variable voltage.

Three phase motors suitable for inverter control.

Electrical supplies

Single phase 230V-50Hz (Capacitor located inside the wiring terminal box)

Three phase 230/400V-50Hz

Working temperatures from -40°C up to 70°C

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

The TD Mixvent series of in line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes.

Another excellent features is the ability to access the internal parts for servicing without needing to remove from the main ducting.  

Manufactured by S&P (Soler and Palau) founded in Spain in 1951 by the engineers Eduard Soler and Josep Palau, this range of painted short cased 2 stage axials are possibly the best performing on the market. This range of Soler and Palau products were formally distributed through Vent Axia known as “turbo props”. This range of fans offers the best combination of performance and price available.

Contra rotating: High Pressure

Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume.

Impeller dynamically balanced

Impeller dynamically balanced according to ISO 1940 standard, giving vibration free operation.

Corrosion resistance

Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws.

Terminal Box

Wiring terminal box with cable gland PG-11

All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors

All the motors are IP65, Class F insulation (1) equipped with thermal protection.

Single phase motors are variable voltage.

Three phase motors suitable for inverter control.

Electrical supplies

Single phase 230V-50Hz (Capacitor located inside the wiring terminal box)

Three phase 230/400V-50Hz

Working temperatures from -40°C up to 70°C