suits any manufacturer of fans

450mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting.

This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans

Can also be used to fix directly to a Silencer

Can also be used to fix directly to ducting

Manufactured from pre Galvanised sheet

450mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

Ziehl Abegg

Elta

Helios

Solar and Palau

Nuaire

Systemair

Vent-Axia

Roof Units

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

Ziehl Abegg

Elta

Helios

Solar and Palau

Nuaire

Systemair

Vent-Axia

Roof Units

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

Ziehl Abegg

Elta

Helios

Solar and Palau

Nuaire

Systemair

Vent-Axia

Roof Units

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

Ziehl Abegg

Elta

Helios

Solar and Palau

Nuaire

Systemair

Vent-Axia

Roof Units

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

149-EL21 suitable for a maximum full load of 1.5 amps

149-EL31 suitable for a maximum full load of 3 amps

149-EL31TK suitable for a maximum full load of 3 amps *

149-EL41 suitable for a maximum full load of 4 amps

149-EL61 suitable for a maximum full load of 6 amps

149-EL61TK suitable for a maximum full load of 6 amps *

149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

Flakt Woods

Ziehl Abegg

Elta

Helios

Solar and Palau

Nuaire

Systemair

Vent-Axia

Roof Units

The Elta Compact SCPP is a 1phase two stage axial fan specifically developed for high pressure requirements not suited to single stage fans. The fans have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing.

Features

Available in 3 sizes 500/560/630 all stocked

The fan can be installed at any angle

Suitable for internal and external use

500dia and 560dia suitable for speed control

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and +50°C when used with a speed controller.

Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

The Elta Compact SCPP is a 1phase two stage axial fan specifically developed for high pressure requirements not suited to single stage fans. The fans have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing.

Features

Available in 3 sizes 500/560/630 all stocked

The fan can be installed at any angle

Suitable for internal and external use

500dia and 560dia suitable for speed control

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and +50°C when used with a speed controller.

Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium

The Elta Compact SCPP is a 1phase two stage axial fan specifically developed for high pressure requirements not suited to single stage fans. The fans have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing.

Features

Available in 3 sizes 500/560/630 all stocked

The fan can be installed at any angle

Suitable for internal and external use

500dia and 560dia suitable for speed control

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and +50°C when used with a speed controller.

Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium

The Compact SCD is a short cased axial fan, featuring Elta’s new high efficiency impeller, designed for duct mounting.

Both 1ph fans are suitable for speed control

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are weatherproofed

This range has a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCD is a short cased axial fan, featuring Elta’s new high efficiency impeller, designed for duct mounting.

Both 1ph fans are suitable for speed control

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are weatherproofed

This range has a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCP is a plate axial fan from Elta featuring their new high efficiency impeller. The fan design, construction and finish provides for a strong durable and weatherproofed range.

All 1ph fans are suitable for speed control

An all metal fan casing and guard provide a long lasting and robust construction

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Fans have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCP is a plate axial fan from Elta featuring their new high efficiency impeller. The fan design, construction and finish provides for a strong durable and weatherproofed range.

All 1ph fans are suitable for speed control

An all metal fan casing and guard provide a long lasting and robust construction

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Fans have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCP is a plate axial fan from Elta featuring their new high efficiency impeller. The fan design, construction and finish provides for a strong durable and weatherproofed range.

All 1ph fans are suitable for speed control

An all metal fan casing and guard provide a long lasting and robust construction

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Fans have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCP is a plate axial fan from Elta featuring their new high efficiency impeller. The fan design, construction and finish provides for a strong durable and weatherproofed range.

All 1ph fans are suitable for speed control

An all metal fan casing and guard provide a long lasting and robust construction

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Fans have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

The Compact SCP is a plate axial fan from Elta featuring their new high efficiency impeller. The fan design, construction and finish provides for a strong durable and weatherproofed range.

All 1ph fans are suitable for speed control. This fan needs a transformer controller; 149-TC110.

An all metal fan casing and guard provide a long lasting and robust construction

Impellors hubs are die cast aluminium and the blades high quality GRP

Fans are suitable for operating temperatures between -20°C and +70°C fixed speed and -20°C and

+50°C when used with a speed controller

Fans have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032)

inverter speed controller

inverter speed controller

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and usually blows when the fan has already failed. Overload protection can protect the fan from failure from such events as foreign bodies (such as a chef’s hat or paper towels jamming the fan blades

We would recommend this starter is used for Commercial or Industrial applications, it’s not usually used for domestic applications.

This standard starter has a full load range of 0.1 to 12 amps.

Max Kw 5.5

Please advise the full load of the fan when ordering

500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

560mm dia x 560mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

315mm dia x 315mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

710mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 7-10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.

The addition of this silencer to a system will act in the same way a silencer does on a car, so if you've ever heard a car with no silencer fitted, this gives you an idea of the impact a silencer can have on a system.

Please Note - for a straight through silencer to work to have the maximum impact on a system, a silencer should be fixed either side of the fan, this will give 3 benefits to the overall noise level of the system.

1. System side (usually the noise level inside a building) noise level is reduced

2. Atmospheric side (usually the noise level outside a building) noise level is reduced

3. The breakout from the fan is reduced, this could be a big factor depending where the fan is fitted, such as a false ceiling in a class room or office area

*Noise is a complicated medium to get right, if in doubt or you have specific target levels to achieve, please contact us via any means you feel comfortable with and we'll find a solution to your problem

710mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting.

A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures.

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

450mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting

Can also be used to fix directly to a Silencer

Can also be used to fix directly to ducting

Hot dipped Galvanised after manufacture

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

• 149-EL21 suitable for a maximum full load of 1.5 amps
• 149-EL31 suitable for a maximum full load of 3 amps
• 149-EL31TK suitable for a maximum full load of 3 amps *
• 149-EL41 suitable for a maximum full load of 4 amps
• 149-EL61 suitable for a maximum full load of 6 amps
• 149-EL61TK suitable for a maximum full load of 6 amps *
• 149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

• Flakt Woods
• Ziehl Abegg
• Elta
• Helios
• Solar and Palau
• Nuaire
• Systemair
• Vent-Axia
• Roof Units

Not sure if your fan is suitable? just ask and we can check for you

Supplied in pairs

315mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package

The Mounting Foot can be used to mount the fan in the horizontal or vertical position

Usually used in conjunction with Anti Vibration Mounts

Can also be used to fit directly to Silencers with or without Anti Vibration Mounts

315mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting

Can also be used to fix directly to a Silencer

Can also be used to fix directly to ducting

Hot dipped Galvanised after manufacture

suits any manufacturer of fans

315mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting.

This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans

Can also be used to fix directly to a Silencer

Can also be used to fix directly to ducting

Manufactured from pre Galvanised sheet

400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting

Can also be used to fix directly to a Silencer

Can also be used to fix directly to ducting

Hot dipped Galvanised after manufacture

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress

The shutter is commonly used to terminate systems where a plate mounted fan has been fitted internally, and used for extraction

Louvre shutters are usually either mounted to an external wall or at the end of a galvanised box to terminate an extract system

This Louvre shutter can only be used on EXTRACT systems, for SUPPLY systems please contact us direct, by any means you feel comfortable with and we will advise what should be used to suit your application

It can also be used to simplify installation by bridging any small gaps between sections of the installation, for example the gap between a fan and the ductwork

Supplied in pairs

400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package

The Mounting Foot can be used to mount the fan in the horizontal or vertical position

Usually used in conjunction with Anti Vibration Mounts

Can also be used to fit directly to Silencers with or without Anti Vibration Mount

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

• 149-EL21 suitable for a maximum full load of 1.5 amps

• 149-EL31 suitable for a maximum full load of 3 amps

• 149-EL31TK suitable for a maximum full load of 3 amps *

• 149-EL41 suitable for a maximum full load of 4 amps

• 149-EL61 suitable for a maximum full load of 6 amps

• 149-EL61TK suitable for a maximum full load of 6 amps *

• 149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

• Flakt Woods

• Ziehl Abegg

• Elta

• Helios

• Solar and Palau

• Nuaire

• Systemair

• Vent-Axia

• Roof Units

Not sure if your fan is suitable? just ask and we can check for you

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

• 149-EL21 suitable for a maximum full load of 1.5 amps
• 149-EL31 suitable for a maximum full load of 3 amps
• 149-EL31TK suitable for a maximum full load of 3 amps *
• 149-EL41 suitable for a maximum full load of 4 amps
• 149-EL61 suitable for a maximum full load of 6 amps
• 149-EL61TK suitable for a maximum full load of 6 amps *
• 149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

• Flakt Woods
• Ziehl Abegg
• Elta
• Helios
• Solar and Palau
• Nuaire
• Systemair
• Vent-Axia
• Roof Units

Not sure if your fan is suitable? just ask and we can check for you

The EL range of electronic fan speed controllers manufactured by Elta. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

• 149-EL21 suitable for a maximum full load of 1.5 amps

• 149-EL31 suitable for a maximum full load of 3 amps

• 149-EL31TK suitable for a maximum full load of 3 amps *

• 149-EL41 suitable for a maximum full load of 4 amps

• 149-EL61 suitable for a maximum full load of 6 amps

• 149-EL61TK suitable for a maximum full load of 6 amps *

• 149-EL101 suitable for a maximum full load of 10 amps

* TK Versions offer means of motor protection via motor thermal Contact.

The EL range of fan speed controllers can be used with any manufacturers fans / motors which are single phase and suitable for speed control via 2 or 3 wires (+earth) including

• Flakt Woods

• Ziehl Abegg

• Elta

• Helios

• Solar and Palau

• Nuaire

• Systemair

• Vent-Axia

• Roof Units

Not sure if your fan is suitable? just ask and we can check for you

inverter speed controller

inverter speed controller

inverter speed controller

inverter speed controller

load range per mount 5Kg -28Kg

load range per mount 5Kg -28Kg

Supplied in sets of 4

Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet.

A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures.

A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer

The main uses we supply A.V. Mounts for are, Axial flow fans, Box fans, Centrifugal fans, in fact A.V. Mounts can be used with anything that causes vibration.

Please be aware A.V. Mounts have to be sized based on the weight of the load being isolated, if in doubt please check prior to making your purchase.

Your chance to have your own branded market leading Flakt Woods ME series electronic fan speed controllers. Just imagine your customer has a problem, and whats there right in front of them, your brand, with your contact details, you can't put a price on this incredible after sales oppurtunity.

The whole range is available for you to buy, for less than you think, and remember these controllers can be used with any manufacturer of fans

You have the freedom to decide on the whole design including colour and fonts, add as much or as little as you feel appropriate

This is a unque oppurtuntity and for a limited time is on special offer, but hurry it won't last for ever

Models available are:

ME1.1

ME1.3

ME1.6

ME1.12

Note: A minimum of 25 off any of sizes can be ordered, so if all you want is 25 off ME1.6's your in luck. Unfortunately we can't accept an order of mixed sized controllers.